Skip to content
RemoteMikroTik

Ahmad Foysal · · 5 min read

5 Ways to Reach a MikroTik Remotely, Compared

An honest comparison of the five common ways to open Winbox from outside, including the cases where you do not need us.

There are five common ways to reach a MikroTik from outside its own network. Each one is the right answer for somebody. This page compares them plainly, so you can choose in a few minutes.

The short answer

Your situation Best choice
The ISP gives a public IP at a fair price, and you manage one or two routers Public IP with a firewall rule
One newer RouterOS 7 router at home, and you only need your own phone or laptop to reach it Back To Home
You already run ZeroTier and your routers are ARM models ZeroTier
You have a server, the skills and the time Your own VPN server
No public IP, older or mixed routers, many sites, or you want alerts and tools as well A hosted tunnel such as RemoteMikroTik

The comparison

Public IP Back To Home ZeroTier Own VPN server RemoteMikroTik
Works behind CGNAT No Yes Yes Yes Yes
RouterOS 6 Yes No No Yes Yes
Older MIPS routers (hAP lite, RB750, RB951) Yes No No Yes Yes
Setup on the router Firewall rules One switch in the app Package and network join VPN client, routes, firewall Paste one script
Software on your phone or PC None App or WireGuard ZeroTier client VPN client None, only Winbox
Cost Monthly fee to the ISP Free Free for small networks Server rent and your time Free for one router, then per router
Offline alerts, backups, voucher tools No No No Only what you build Yes, by plan

Details change over time, so check the vendor's own documentation before you decide. The notes below say what each row is based on.

1. A public IP from the ISP

With a public IP the router is directly on the internet. You allow Winbox from your own address in the firewall and connect.

Good: simple, fast, nothing in between.

Not so good: many providers cannot give one at all. Mobile lines, Starlink's standard plans and most budget fibre lines use CGNAT. Where it is offered, it is a monthly fee for every site. An open Winbox port on a public address is also scanned all day, so the firewall must be strict.

2. Back To Home

Back To Home is MikroTik's own feature. You switch it on from the MikroTik phone app, and the app builds a WireGuard VPN to your router, through MikroTik's relay if the router has no public IP.

Good: free, made by MikroTik, very little setup.

Not so good: MikroTik's documentation lists RouterOS 7.12 or newer on ARM, ARM64 and TILE devices. RouterOS 6 and the older MIPS models, which is a large share of routers in the field, are not supported. It is a VPN for you and the people you share it with, so every device needs the app or a WireGuard profile. It is built for one home router, not for a list of customer routers, and it has no alerts or backups.

3. ZeroTier

ZeroTier makes a private network between your devices. MikroTik publishes a ZeroTier package for RouterOS 7.

Good: works behind CGNAT, often with a direct path between the two ends, free for small networks.

Not so good: the package exists only for ARM and ARM64 routers. Each PC and phone needs the ZeroTier client. You manage the network, the members and the routes yourself.

4. Your own VPN server

You rent a small server with a public IP, or use a router at a site that has one. Every remote router connects to it with SSTP, L2TP, OpenVPN or WireGuard, and you add port forwards or routes for each one.

Good: full control, works on every RouterOS version, no per-router fee.

Not so good: the server is yours to secure, update and keep running. Each new router means new users, addresses and rules. When it breaks, all your sites are unreachable at once, and it is your night that is spent on it.

5. A hosted tunnel (RemoteMikroTik)

This is the fourth option run for you. The router connects out to our server with SSTP on port 443. You get a fixed address and port for Winbox, and on paid plans for WebFig and the API.

Good:

Not so good:

  • Your session passes through our server, so you trust us with the path. The router's own login still protects it, and we never ask for your admin password.
  • Beyond the first router there is a price per router. See plans and prices.
  • It gives access to the router and to devices you choose. It is not a general VPN for all your traffic.

How to choose

Ask three questions.

  1. Does the site have a public IP? If yes and it is cheap, use it and lock the firewall.
  2. Which routers do you have? If any are RouterOS 6 or MIPS models, Back To Home and ZeroTier are out.
  3. How many routers, and who looks after them? For one home router, Back To Home is hard to beat. For ten customer routers, you want one list, one way in and a message when something goes down.

Try the hosted way for free

The Free plan gives Winbox access for one router, with no card. Create an account at https://remotemikrotik.com, add the router and paste the setup script. It takes about two minutes, and you can remove it again by deleting one interface and one user.

Start with Add your first router.