Using the panel
Reach cameras and devices behind your router
Add a device on the router page and get an address you can open from anywhere.
1 min read · Updated
Your router's own Winbox, WebFig and API addresses reach the router. Device ports reach something behind it: a CCTV camera or DVR, a NAS, a server or another device on the router's network, from anywhere and without a public IP.
Steps
- Open Routers, pick the router, and find Devices behind this router.
- Press Add device.
- Enter a name (e.g. Front gate camera), the device's IP on your network (e.g.
192.168.88.10) and its port (web page usually80, RTSP554). - Optional: in Only from, enter your office or home IP, so nobody else can even try to connect.
- Press Save. In a few seconds the device shows Open with its address, e.g.
vpn1.remotemikrotik.com:20000. Press Copy, or Open for web pages.
Good to know
- The router must be online. If it is offline when you add a device, the port opens as soon as it connects again.
- The panel adds the needed rules to your router by itself (tagged RemoteMikroTik device port); your own firewall rules are not touched.
- The device is reachable from the internet: change its default password first, or use Only from.
- Ports 23, 25, 135–139, 445 and 1900 can't be used, for safety.
- Included device ports per plan, and the price of extra ports, are shown in the Add-ons box on the router page.
Questions
How many devices can I add?
Each plan includes some device ports; you can buy more per router under Add-ons on the router page. The router page shows how many you are using.
Can I use it for RTSP camera streams?
Yes. Add the camera with port 554 and use the address in your viewer app, e.g. rtsp://vpn1.remotemikrotik.com:20000/...
What happens if my plan or add-on ends?
The extra ports are paused, not deleted. Buy the ports again and they open with the same addresses.
Still stuck? Open a support ticket and tell us which step didn't work.