Using the panel
Connect your branches (site-to-site)
Your offices' networks reach each other through RemoteMikroTik, with no public IP.
1 min read · Updated
With a branch network, computers and devices in one office can reach those in your other offices, through the RemoteMikroTik tunnels your routers already have. No public IP or extra VPN is needed.
Each router in a branch network needs a Branch connection: an add-on on Pro, included in Business.
Steps
- Make sure each office uses a different address range, e.g. Head office
192.168.10.0/24, Branch192.168.20.0/24. Two offices can't both use the default192.168.88.0/24. - Open Branch networks in the menu, enter a name, choose the server your routers are on, and press Create.
- Press Add router, choose a router, press Read from router and tick its office network (or type it).
- Press Save, and repeat for your other routers.
- When each router shows Connected, press Test → other branch to check that they reach each other.
Good to know
- The panel adds routes and one firewall rule on your routers (tagged RemoteMikroTik branch); your own rules are not touched.
- If a router is offline or suspended, it shows Paused or Not connected, and the others stop sending to it. It reconnects by itself.
- Devices in the other offices must use their own router as gateway, which is the usual setup.
Questions
Can other customers reach my branches?
No. Our server only lets traffic through between the routers of the same branch network, and only from each router's own networks. Everything else going to a branch network is dropped.
Why does it say my range is used by another customer?
Routes on one of our servers are shared, so each address range can belong to only one customer there. Change that office's LAN to a less common range, such as 10.25.1.0/24.
Do all routers have to be on the same server?
Yes, for now. All routers of a branch network must use the same RemoteMikroTik server.
Still stuck? Open a support ticket and tell us which step didn't work.