Skip to content
RemoteMikroTik

Using the panel

Get an alert when a device behind your router goes down

Your router pings your devices; you get an alert when one stops answering.

1 min read · Updated

Your router can keep an eye on the devices behind it, such as cameras, a server, an access point, or the internet link, and tell you when one stops answering. It uses MikroTik's own netwatch, so nothing extra runs on your network.

Steps

  1. Open Routers, pick the router, and find Watch devices.
  2. Press Watch a device.
  3. Enter a name and the device's IP address (e.g. 192.168.88.64). Leave Alert me on.
  4. Press Save. The router starts checking it every 30 seconds.
  5. Each device shows Up or Down, since when, and how much of the last 7 days it was up.

Alerts

When a device stops answering or comes back, you get an alert in the panel and on Telegram (if Telegram is connected). We read the router's results every few minutes, so an alert can arrive a few minutes after the change; the time shown is when it really happened.

Included watched devices per plan, and extra ones, are shown in Add-ons on the router page.

Questions

Does this use my internet?

Hardly: the router sends a small ping every 30 seconds to each device.

Can I watch something on the internet?

Yes, any IPv4 address. Watching 8.8.8.8 tells you when the site's internet link is down while the router itself is still up.

Still stuck? Open a support ticket and tell us which step didn't work.