Skip to content
RemoteMikroTik

Support & account

Keep your router safe

What our access can do, and good habits on your side.

1 min read · Updated

What the panel can do on your router

The setup script adds one user for the panel (its name starts with rm_), in the write group. The panel uses it to:

That user only works from the tunnel gateway address, so nobody can use it from the internet. Its password is random and stored encrypted. We never ask for your own admin password.

What is protected

  • The tunnel to our server is encrypted (SSTP over TLS, port 443).
  • Backups don't contain passwords.
  • The panel and website use HTTPS, logins are rate-limited, and email changes need confirmation.

Good habits on your router

  1. Use a strong admin password, and don't use the default admin user name.
  2. Keep RouterOS up to date: System → Packages → Check For Updates.
  3. Don't open Winbox, WebFig, API or SSH on the WAN if the router has a public IP. With RemoteMikroTik you don't need to.
  4. Limit services to the addresses you use: /ip service set winbox address=192.168.88.0/24,10.169.0.1/32 (your LAN, plus the tunnel gateway shown in your setup script).
  5. Remove services you don't use, for example /ip service disable telnet,ftp.

Important: If you limit API or SSH to certain addresses, include the tunnel gateway from your setup script, or status checks and backups stop working.

Questions

Can RemoteMikroTik staff log in to my router?

The panel's own router user is used by the panel for status checks, backups and the Telegram tools you trigger. It only works from inside the tunnel. Staff do not have your admin password.

How do I remove RemoteMikroTik from my router?

Delete the RemoteMikroTik interface (Interfaces) and the user starting with rm_ (System → Users). The tunnel and the panel's access are gone at once.

Still stuck? Open a support ticket and tell us which step didn't work.