Skip to content
RemoteMikroTik

Using the panel

Remote LAN access from your laptop or phone

One WireGuard connection on your laptop or phone reaches all your routers and their LANs.

2 min read · Updated

With Remote LAN access you connect your own laptop or phone to RemoteMikroTik with the free WireGuard app. Then you can open every one of your routers (Winbox, WebFig, SSH) and every device behind them, such as cameras, NVRs, servers and access points, by their local IP address, from anywhere.

It works with a single router too, and it does not need a public IP.

What you need

  • The Remote LAN access add-on. One pack gives 3 devices (laptops or phones). Need more? Add another pack. You buy it on one of your routers (router page → Add-ons, or the Add-ons page), and the devices reach all your routers.
  • The WireGuard app: Play Store, App Store, or wireguard.com for Windows, macOS and Linux.

Add a device

  1. Open Remote access in the menu.
  2. Give the device a name (for example My laptop) and press Add device.
  3. Phone: in WireGuard press + → Scan from QR code. Computer: download the .conf file and use Import tunnel from file.
  4. Switch the tunnel on.

Now open your router at its tunnel address (shown on the page, for example 10.169.1.5) in Winbox.

Reach the LAN behind a router

Under What your devices reach, press Add LAN next to a router. Press Read from the router to pick its networks, or type them (for example 192.168.88.0/24), then Save.

After you add or change a network, the device shows New config: download again. Scan the code or import the file again, so the app knows the new network.

A range can be used by only one router on a RemoteMikroTik server, and your own ranges must not overlap each other.

Lost a device?

Press New keys (the old config stops working at once) or Delete the device.

How it works

Your device connects to the WireGuard interface rm-remote on our server (UDP port 13231). The server only passes traffic from your devices to your own routers and the networks you chose. Your routers see the traffic coming from the server's tunnel address, so nothing has to be set up on them; for a router with a LAN network, the panel adds one firewall rule with the comment RemoteMikroTik remote access, so a strict firewall lets it reach the LAN.

Questions

Does my internet go through RemoteMikroTik when the tunnel is on?

No. Only traffic to your routers' tunnel addresses and the LAN networks you chose goes through the tunnel. Everything else uses your normal internet.

Can other customers reach my networks through this?

No. Our server lets a device reach only its own account's routers and networks. Other customers, the internet and the server itself are blocked.

My routers are on different RemoteMikroTik servers. Do I need several tunnels?

No. The config has one entry for each server your routers are on, so one tunnel in the WireGuard app covers all of them.

Why can't I open a device on 192.168.1.x?

If the Wi-Fi you are on uses the same range as the router's LAN, your laptop or phone sends the traffic to the local network instead. Give the router's LAN a less common range, such as 10.25.1.0/24.

Still stuck? Open a support ticket and tell us which step didn't work.